Download E-P2 Instruction Manual

s0026_e_00_0_unified.book Page 89 Tuesday, September 29, 2009 10:30 AM
Single-frame erase
1
2
Display the images you want to erase and press the D
button.
Use fg to select [YES], then press the i button.
D button
Erasing selected frames
During index display, you can select multiple images and erase them all at the same time.
1
2
3
4
Select the images you wish to erase on the index display, then press i.
• The selected images will be shown with v.
• To cancel your selection, press the i button again.
Press k to select the next images you want to protect, then press the i button.
After you have selected the images to erase, press the D button.
Use fg to select [YES], then press the i button.
All-frame erase
MENU[W][CARD SETUP]
Use fg to select [ALL ERASE], then press the i button.
Use fg to select [YES], then press the i button.
• All frames will be erased.
TIPS
To erase immediately:
j If you have set “QUICK ERASE” (gP. 106) to [ON], pressing the D button will erase an image
immediately.
j You can set the initial position of the cursor to [YES]. g“PRIORITY SET” (P. 107)
5
Playback functions
1
2
3
89
EN