1
Download User Guide - Signal Boosters
Transcript
Installation Installation Steps: Step 1. Installing your Hardware Connect the Outside Antenna 1. Connect the magnetic outside antenna to the roof of the car in a location that: • Is on top of the vehicle • Has at least a 12-inch radius clear of obstructions and other radiating elements, such as a radio antenna. • Is at least 4-6 feet from the inside antenna. 2. Using the supplied cable, connect the outside antenna to the booster connector marked OUTSIDE. 3. Run the outside antenna cord across the car’s roof and under the front door insulation lining to hide and protect the antenna cable. Wrap up any loose cable 4. Hand tighten the connection Note: The outside antenna must not be collocated or operating with any other antenna or booster. Magnetic Antenna Inside Patch Antenna Power Adapter TriFlex2Go SureCall | 48346 Milmont Dirve, Fremont CA 94538 | 1-888-365-6283 | [email protected] 5
