Transcript
Maintenance Features - Premium CREE XR-E Q5 LED - Maximum output of 330 lumens - Maximum runtime of up to 5 hours - Water, dust and impact resistant. - Multiple output modes are conveniently accessed via button switch - User-defined mode provides customized brightness levels plus strobe - Broad voltage circuit accepts both rechargeable and non-rechargeable Lithium batteries as well as Alcaline batteries - Constructed from aerospace-grade aluminum alloy Included Items 1 x GOVOLT® 14500 Li-ion Rechargeable Battery 1 x GOVOLT® Nano Charger 1 x Wrist Lanyard Spare O-rings, User Manual, Warranty Card Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant. Warranty Service All GOVOLT® products are warranted for quality. DOA / defective products can be exchanged for replacement through a local distributor/dealer within the 14 days of purchase. After 14 days, all defective / malfunctioning GOVOLT ® products will be repaired free of charge for a period of 18 months from the date of purchase. After 18 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts. The warranty is nullified in all of the following situations: 1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties. 2. The product(s) is/are damaged through improper use. 3. The product(s) is/are damaged by leakage of batteries. Optional Accessories - GOVOLT® Tactical Filter Kit - GOVOLT® High Drain 14500 Li-Ion Batteries Dimensions For full terms visit www.govolt.com/warranty Length: 150mm (5.9”) Head Diameter: 32 mm ( Tail Di ameter : 25.4mm ( 1” ) Weight: 90grams (3.17oz)(without battery For the latest information on GOVOLT® products and services, please visit govolt.com, contact your national GOVOLT® distributor, or send an email to [email protected]. SWITCHING ON/OFF OPERATING INSTRUCTIONS TO SWITCH ON: Press the green button on the end cap until a “Click ” is heard. TO SWITCH OFF: Press the green button on the end cap a second time until a “Click ” is heard. MODE SWITCHING The ZL1 has 3 modes: High, Low, and Strobe. These 3 modes can be changed by lightly pressing the green button on the End Cap. ZOOM FUNCTION To focus or widen the beam, simply pull or push the Lens Cap towards or away from the main body of the torch. FOCUSING RING BATTERY INSTALLATION (see above diagram) 1. Unscrew the end cap in a counter-clockwise direction. 2. Insert one 14500 Li-Ion battery or one AA alkaline battery with the positive pole pointing inward (towards the hole) Turn the Focus Ring to adjust the focus when the lantern is retracted Lens Cap Lantern NOTE: Ensure batteries are inserted with the positive (+) end pointing towards the inside. The ZL1 will not operate with incorrectly inserted batteries TO CHARGE LI-ION BATTERY 1. Remove battery 2. Insert one 14500 Li-Ion battery into charger with the positive pole pointing downward (towards the bottom) 3. Wait until indicator light turns from red to green Button Focus Ring LANTERN MODE End Cap Pull the Lens Cap away from the main body to expose the lantern, twist and retract the lens cap to use as a normal flashlight PERFORMANCE SPECIFICATIONS STROBE HIGH LOW 165 330 100 1h 50min 1h 3h 20 min 3h 1h 40min 5h High Powered LED Flashlight & Lantern USER MANUAL 230m (Beam Distance) 13000cd ( Peak Beam Intensity) 1.5m 1.5 m (Impact Resistant) IPX-5 (water resistant) TEL: 888-778-2823 E-mail: [email protected] Address: 2445 Hilton Drive, Suite 126 Gainesville, Georgia 30501 Designed In USA Made In China www.govolt.com