Download m9 DECT m9 DECT Administrator Guide
Transcript
Setting up the Handsets for Use Note: If the handset fails to register automatically, a manual registration can also be performed. Instructions are as follows: g Handset g Register handset g 1. Press the center navigation button, followed by Base 1. 2. Enter your PIN, and press OK to register the handset. Once the handset has registered with the base, the idle screen is displayed. 4. Repeat these steps for each handset. Setting the Server Type This section allows you how to set the server type and specify SIP settings (instructions for Microsoft® Lync 2010 are also provided). 1. From the m9 web interface, click SIP from the top navigation bar: 2. Configure the settings as detailed below: Server Type: Server profiles provide support for non-standard functionality of some of the most popular VoIP platforms in the market, enabling snom m9 product ease of use and integration with third-party IPBXs. Server-type supported platforms include: Microsoft Lync 2010 Cisco Call Manager Broadsoft Asterisk snom ONE Metaswitch Telepo BCS Advoco NetPBX Avaya CM 7