Download itapp User Manual

CHAPTER 6 CONFIGURATION
6.11 Access Servers
6.11.1
Create Network Access Server
Each time a new terminal server is added to the network, a new
entry needs to be made in the database. This sets up the network
access server (NAS) on the authentication server to allow for
incoming authentication requests.
X To configure a new network access server
1
Click Configuration > Access Servers > Create Network
Access Server.
The Create Network Access Server dialog box appears.
2
Enter information following the guidelines in Table 29.
3
Click Create NAS.
Table 29 Create Network Access Server Dialog Box Fields (Page 1 of 3)
Field
Description
NAS Name
Type the new NAS name using the
standard format “tsx-city.domain.com”
where x is the number of the terminal
server in the particular city. For
example, if this were the second
terminal server in Victoria, the name
would be ts2-victoria.domain.com. Use
this naming convention wherever
possible. However, if network providers
have already established names for their
NASs, use their naming conventions.
Note: Type the NAS Name in lowercase.
NAS IP
NAS Pool
NAS Pool Size
Type the IP address of the NAS, the first
IP address in the pool that the dialup
lines will select from, and the number of
dialup lines on the terminal server.
Your Network Provider can provide the
IP address information.
If IP Applications manages your address
space, obtain the information from your
Support Representative.
Official Name
itapp-User-Manual-v03_12_00-R01
Change the Official Name to Yes if you
want to build a reverse DNS entry for
the NAS address and address pool.
146