Download User manual M3

Transcript
5. Setting up the device
Menu level
Parameterisation level
Back to menu group level, rEt:
With [P] the selection is confirmed and the device changes into menu group level „– rel –“.
5.4.7. Alarm parameters
Menu group level
Menu level
Menu level
Parameterisation level
Dependency alarm1, ALrM.1:
Default: actua
The dependency of alarm 1 can be related to special functions, in detail these are the current
measuring value, the min-value, the max-value. With [P] the selection is confirmed and the
device changes into menu level.
Example:
By using the maximum value Alarm.1 = Max.va in combination with a threshold monitoring Fu-1 =
High, an alarm confirmation can be realised. Use the navigationkeys, the fourth key or the digital
input for confirmation.
Threshold values / Limit values, LI-1:
Default: 200.0
The limit value defines the threshold, that activates/deactivates an alarm.
Hysteresis for threshold values, HY-1:
Default: 0.0
The delayed reaction of the alarm is the difference to the threshold value, which is defined by
the hysteresis.
19