Download User Manual - Princess Auto

V 2.0
3.5 Gallon
Parts Washer
8003630
SPECIFICATIONS
Working Capacity
3.5 gallons
Pump
120V, 16 GPH
Dimensions
17 x 13 x 8-3/4 in.
SAFETY WARNINGS
•
•
•
•
•
•
•
Do not overfill with solvent. Fill to just below level of parts tray.
Do not use any solvent with a flashpoint below 100°F.
Use water-based solvents only.
Use only in a well ventilated area.
Do not operate while smoking.
Do not operate near heat sources such as heaters, sparks or open flame.
Should fire occur in parts washer, do not attempt to move parts washer. Lid is on fusible link and will fall
automatically to extinguish flame.
• Do not modify or jam lid to keep lid locked in an open position.
• Replace damaged parts immediately.
• Use only on grounded 115 Volt, 60 Hz outlet.
GROUNDING INSTRUCTIONS
This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electrical
shock by providing an escape wire for the electric current. This product is equipped with a cord having a grounding
wire with an appropriate grounding plug. The plug must be plugged into an outlet that is properly installed and
grounded in accordance with all local cords and ordinances.
WARNING!: Improper installation of the grounding plug can result in a risk of electric shock. If repair or
replacement of the cord or plug is necessary, do not connect the grounding wire to either flat blade terminal.
The wire with insulation, having an outer surface that is green with or without yellow stripes, is the grounding wire.
Check with a qualified electrician or serviceman if the grounding instructions are not completely understood, or if
in doubt as to whether the product is properly grounded. Do not modify the plug provided; if it will not fit the outlet,
have the proper outlet installed by a qualified electrician.
This product is for use on a nominal 120 volt circuit and has a grounding plug. Make sure that the product is
connected to an outlet that has the same configuration as the plug. No adapter should be used with this product.
For technical questions call: 1-800-665-8685
2