Download TM06-SM08 STM46

– TM06-SM08-STM46 –
3/ Select the satellite for alignment in the list (with the knob).
4/ Slowly turn the dish until you get the highest level and hearing the locking signal.
5/ Slightly turn the LNB to get the highest quality (counter-polarization).
You can hear a melody as soon as the first transponder has been found; then, you will hear beeps.
The higher the quality, the more frequent these beeps.
If the appliance has not been synchronized on all four transponders, the quality indicator is
red.
If the appliance is synchronized on all four transponders but the reception quality is medium,
orange.
it is
If the appliance is synchronized on all four transponders and if the reception quality is good,
green.
it is
Caution:
To identify a satellite, the appliance must be synchronized on all 4
transponders.
However, some transponders are regularly modified.
Consult the frequency plan of the satellite when the transponder does not seem to work.
Some switches or LNB only work with DiSEqC commands. In this case, position the OL
and the polarization on DiSEqC at the LNB-DiSEqC configuration page (Caution: the
orientation will be slower if you use the DiSEqC command).
p. 46