Download User Manual - Projector Central

sp4800_ug_en.fm Page 16 Monday, September 29, 2003 2:08 PM
Component video connection
connect component cables via Component
to S-video adapter
If your video device has component connectors, use the Component to Svideo adapter. For HD and progressive sources use the Component to VESA
adapter along with a Component cable (not included).
or
via Component to VESA adapter
Plug the Component cable into the video device. Plug the other end of the
Component cable into one of the two adapter’s and plug the adapter into
the projector’s S-video (for S-video) or Computer in (for VESA) connector.
Component
to VESA
Component connection offers the highest quality video output.
Component
to S-video
VGA connection
If your video device has a 15-pin VGA output, plug one end of the computer cable to the VGA connector on your video source. This connector may
be labeled “To Monitor” on the video source. Plug the other end of the cable
into the Computer In connector on the projector.
connect VGA cable and
AV cable
For audio, connect the white and red AV cable connectors into your video
device. Plug the blue connector into the projector’s Audio In connector.
Connect the power cord to the Power connector on the side of the projector
and to your electrical outlet.
connect power cable
NOTE: Always use the power cord that shipped with the projector.
16