Download DATOSPIR MICRO

Chapter 2: Model A Operating
DATOSPIR MICRO User’s Manual
96
programme version and the bios version (programme run during
booting), the date and the time.
•If start-up is automatic (because it is the time programmed
in Alarms):
1 The equipment will start up and the start screen will appear
along with the model, the programme version and the bios
version, the date and the time.
The following screen will then appear:
START THE TEST
PRESS THE KEY
and the equipment will issue a beeping sound every 10 seconds.
If, for 2 minutes,
switch off.
Press the key
2
is not pressed, the equipment will
.
The following screen will appear:
BLOW
The patient is given 30 seconds to start the FORCED EXPIRATION
manoeuvre.
3
The following screen is then displayed:
BLOW AGAIN
511-A00-MU2 • REV. 2.03