Download 2016 Dodge Challenger SRT/Hellcat Owner`s Manual

164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
WARNING!
The Resume function should only be used if traffic
and road conditions permit. Resuming a set speed
that is too high or too low for prevailing traffic and
road conditions could cause the vehicle to accelerate
or decelerate too sharply for safe operation. Failure to
follow these warnings can result in a collision and
death or serious personal injury.
To Vary The Speed Setting
To Increase Speed
The speed increment shown is dependant on the chosen
speed unit of U.S. (mph) or Metric (km/h):
U.S. Speed (mph)
• Pressing the SET + button once will result in a 1 mph
increase in set speed. Each subsequent tap of the
button results in an increase of 1 mph.
• If the button is continually pressed, the set speed will
continue to increase in 5 mph increments until the
button is released. The increase in set speed is reflected
in the DID.
Metric Speed (km/h)
While ACC is set, you can increase the set speed by
• Pressing the SET + button once will result in a 1 km/h
pressing the SET + button.
increase in set speed. Each subsequent tap of the
The drivers preferred units can be selected through the
button results in an increase of 1 km/h.
instrument panel settings if equipped. Refer to “ Understanding Your Instrument Panel” for more information.