Download PLC user manual
Transcript
ECC-1 user manual Optional accessories Optional accessories Temperature probe You can install a second temperature probe for controlling fans independently of sprinkling cycles. This is useful if you want to monitor temperatures in a second area or zone. Probes are available in 1, 6, 30, 75, or 150-foot cable lengths and can be extended up to 500 feet using extension cable. Extension cable Extension cable is for extending temperature probes to remote locations. Extension cable is available in 500-foot lengths. Humidity sensor A humidity sensor is necessary if you want to use the humidity bypass feature of the ECC-1. For more information about the humidity bypass feature, see Programming the humidity bypass on page 33. Phason offers two models of humidity sensors: the RHS or the RHS-P. The RHS monitors humidity at the control. The RHS-P monitors humidity up to 100 feet from the control. About this manual The ECC-1 user manual describes the features of the ECC-1 and how to use them. The manual is divided into six sections: Introducing the ECC-1 (this section) Installing the ECC-1 (on page 8) Configuring the ECC-1 (on page 19) Programming the ECC-1 (on page 25) Using and maintaining the ECC-1 (on page 38) Appendices (on page 45) 290400 rev 0 3