Download Runco DR-300c User Manual - Pdfstream.manualsonline.com

Projector Placement and Offset Information
Ceiling Mount Configuration
6.090
2.842
1.895
B
Projector Base
1.745
Base plate to center of lens
3.398
C
angle
A
Screen Top
Half Screen
Length
Screen Center
Full Screen Length
Screen __________ (H) x __________ (W)
NOTE: These figures
are the same for both
ceiling and floor
configurations. The
offset figures are with
the “16:9 Position”
setting in the CENTER
position (see page 22).
B) THROW DISTANCE FOR 4 x 3 or 16 x 9 SCREENS:
Minimum: = (screen width x 2.0) = __________ inches
Maximum: = (screen width x 2.3) = __________ inches
C) VERTICAL OFFSET:
Distance between lens center and top edge of viewing area (bottom edge for floor mount):
For use on 4 x 3 ratio screens: (screen width x .173) = __________ inches
For use on 16 x 9 ratio screens: (screen width x .265) = __________ inches
Screen Top
Full Screen Length
Screen Center
Floor Mount Configuration
Half Screen
Length
A
C
angle
4.028
3.398
1.745
Base plate to center of lens
Projector Base
B
10