Download AT Commands Reference Manual

AT Commands Reference Manual
Defined Values
<value>
A decimal number corresponding to the selected option:
0
Disables reporting of modulation connection
(+MCR: and +MRR: are not transmitted).
(Default.)
1
Enables reporting of modulation connection
(+MCR: and +MRR: are transmitted with tx rate,
rx rate).
2
Enables reporting of modulation connection
(+MCR: and +MRR: are transmitted with rx rate
only).
Reporting Current or Selected Values
Command: +MR?
Response:
+MR: <current value>
Example:
+MR: 0
For default setting
Reporting Supported Range of Parameter Values
Command: +MR=?
Response:
+MR: (<value>range)
Example:
+MR: (0-2)
+MCR: Report Syntax
Response:
+MCR: <carrier>
<carrier>
3-54
Alphanumeric code corresponding to the reported carrier.
Defined values are:
B103
For Bell 103
B212
For Bell 212
V21
For V.21
V22
For V.22
V22B
For V.22bis
V23C
For V.23
V32
For V.32
V32B
For V.32bis
V34
For V.34
K56
For K56flex
V90
For V.90
V92
For V.92
Conexant
100722B