Download User`s Manual - Tru

Tru-Traffic 10.0: Quality-Assured Traffic Signal Coordination
Operation
Spoken Phrase
Comments
"Step Forward"
prepares Tru-Traffic to accept the
geographic coordinates of the next
intersection by voice command. To use this
command, you must first (manually) open
the Intersection Parameters window and
click the button.
Previous Intersection (in
Reverse direction)
"Previous Intersection"
"Previous Signal"
"Previous Node"
"Go Backward"
"Step Backward"
This is equivalent to clicking the
button on the geographic coordinates
window to advance the window to next
intersection in the "reverse" direction. This
prepares Tru-Traffic to accept the
geographic coordinates of the previous
intersection by voice command. To use this
command, you must first (manually) open
the Intersection Parameters window and
click the button.
Next or Previous
Intersection
"Go North"
"Go South"
"Go East"
"Go West"
"Step North"
"Step South"
"Step East"
"Step West"
This can be equivalent to clicking the
() button on the geographic coordinates
window to advance the window to next
(previous) intersection in the "forward"
("reverse") direction. Whether it's Next or
Previous, and whether it does anything at
all, depends on the orientation of the
diagram. That is, if you say "North", then
the Forward Direction must be either
"North" or "South" for this operation to take
effect.
Synchronize Clocks
"Synchronize Clocks"
"Synchronize Now"
"Synch Point"
This is equivalent to clicking the
button on the GPS
Clocks Page to synchronize the traffic
signal clocks with the GPS satellite clocks.
Any of the spoken phrases can include "please" at the end, but Tru-Traffic responds even without hearing
the magic word.
Tips on Using the Speech Recognition Engine
The following tips come in handy in using Voice Commands to control the data collection through a GPS
receiver.
76