Download SLE Accessories Catalogue
Transcript
SLE Accessories Catalogue SLE Accessories and Consumables for use in the Neonatal Unit When the smallest thing matters Contents SLE2000 & SLE2000 HFO Ventilator Accessories............................................ 4 SLE350 & SLE500 Compressors..................................................................... 4 SLE4000 & SLE5000 Ventilator Accessories.................................................... 5 SLE3600 Inosys Nitric Oxide Therapy System Accessories.............................. 6 Nitric Oxide Circuits and Nebuliser kits............................................................ 6 Biomed NeO2 Blender..................................................................................... 6 SLE1000 nCPAP Driver Accessories................................................................ 7 Aeroneb Solo................................................................................................... 7 Patient Circuits................................................................................................ 8 Filters.............................................................................................................. 8 Procedure Packs............................................................................................. 9 Parts for Reusable Circuits.............................................................................. 9 Fisher & Paykel Accessories.......................................................................... 10 SLE1000 nCPAP Generator........................................................................... 11 Inca (Ventilator nCPAP) system, Cannulaide nasal seals................................. 12 Cannula securing devices and Skin preparation tabs..................................... 13 Miniflow (Ventilator nCPAP system)................................................................ 14 Disposable Humidifiers.................................................................................. 14 TSI Ventilator Test Systems............................................................................ 14 This catalogue is distributed world-wide, and not every product is available in every country. Please check with your local distributor as to the availability of individual products. Items marked with this logo are available as a downloadable brochure or a data-sheet at www.sle.co.uk If you are viewing this brochure as a PDF and are connected to the Internet, then clicking on the icon will take you to the relevant English language datasheet (other languages may also be available). When the smallest thing matters Tel: +44 (0)20 8681 1414 • [email protected] • Fax: +44 (0)20 8649 8570 • www.sle.co.uk 3 SLE2000 & SLE2000 HFO SLE2000 Infant ventilators & accessories SLE2000 HFO Part Number N2191 Oxygen Sensor N2186 Silencer Description N2191 Oxygen Sensor for use with SLE2000/HFO/HFO+ N2190 Exhalation block assembly for SLE2000 N0635 Exhalation block assembly for SLE2000 HFO N0635/60 Exhalation block assembly for SLE2000 HFO+ N2186 Silencer - suitable for SLE2000, SLE2000 HFO AND SLE2000 HFO+ N2302 Hose hook for SLE2000/HFO/HFO+ Z0005 Water trap for air supply N2035 Oxygen hose assembly (U.K.) N2199 Air hose assembly (U.K.) N2035/01 Oxygen hose assembly (Export) N2199/01 Air hose assembly (Export) N1770 Stand and pole assembly. Suitable for SLE2000, HFO and HFO+ N2328 Test Lung - suitable for all SLE ventilators N2263 Blue metal restrictor for use with 15 mm reusable circuit. N2266 Red metal restrictor for use with 10 mm reusable circuit. N2190 Exhalation Block for SLE2000 N2328 Test Lung N2266 Red Restrictor SLE350 & SLE500 Medical Air Compressors Part Number Description L0350 SLE350 Suitable for use with SLE2000 L0500 SLE500 Suitable for SLE2000 HFO, SLE2000 HFO+, SLE4000 and SLE5000 The SLE350 and SLE500 Air Compressors are an ideal air source for all SLE ventilators when piped-in compressed air is not available or when you need a back-up air source for added protection. Easily accessible filter and indicators make regular maintenance simple and cost effective. Large, lockable castors provide effortless mobility and stability. L0500 Compressor 4 Tel: +44 (0)20 8681 1414 • [email protected] • Fax: +44 (0)20 8649 8570 • www.sle.co.uk SLE4000 & SLE5000 Infant ventilators & accessories SLE4000 Part Number Description N6652 Medicart 5 - Deluxe Trolley for SLE4000/5000 N2328 Test Lung - suitable for all SLE ventilators N6647 Silicone Test Lung suitable for SLE4000/5000 N5402 Autoclavable Flow Sensor for SLE4000/5000 (Each) N5302/05 Single-use Flow Sensor for SLE4000/5000 (Box of 5) N5302/50 Single-use Flow Sensor for SLE4000/5000 (Box of 50) N6656 Flow Sensor Cable for SLE4000/5000 (Each) N2186/01 Silencer for SLE4000/5000 N6622 Exhalation Block for SLE4000/5000 N6627/212 Patient Circuit Support Arm N2266/50 Amber metal restrictor for use with 10 mm reusable circuit. N2191/10 Oxygen Sensor for use with SLE4000/5000. L0291 Oxygen Alarm Silencer (For Demonstration Use Only) SLE5000 N2191/10 Oxygen Sensor N5302 Single-use Flow Sensor N5402 Autoclavable Flow Sensor N6647 Silicon Test Lung N6622 Exhalation Block N2186/01 Silencer N6627/212 Patient Circuit support arm N6652 Medicart 5 Trolley L0291 Oxygen Alarm Silencer (For Demonstration Use Only) N6656 Sensor Cable Tel: +44 (0)20 8681 1414 • [email protected] • Fax: +44 (0)20 8649 8570 • www.sle.co.uk 5 SLE3600 Inosys Nitric Oxide System (Not available in the UK) For use with fixed-flow ventilators SLE3600 Inosys Part Number Description N6651 INOSYS System Trolley c/w bottle holders Nitric Oxide Circuits & Nebuliser kits Z4123 Inosys Calibration kit Part Number Description BC6216 Nitric Oxide Delivery Kit for 3rd Party Delivery Systems (Pack size - 1) BC2110/KIT/5 Nitric Oxide Delivery Kit for use with Inosys and SLE2000/2000 HFO (Pack size - 5) BC3110/KIT/5 Nitric Oxide Delivery Kit for use with Inosys and SLE2000 HFO (Pack size - 5) BC4110/KIT/5 Nitric Oxide Delivery Kit for use with Inosys and SLE4000/5000 (Pack size - 5) N4110/20 Nitric Oxide dual hose scavenging filter assembly for SLE2000 HFO/ 2000 HFO+/ 4000/ 5000 infant Ventilators (Pack size - 1) BC2508/15 Nebuliser Kit 10 mm breathing circuits, for use with all SLE 10 mm BC Circuits (Pack size - 15) BC2506/25 Nebuliser Kit 15 mm breathing circuits, for use with all SLE 15 mm BC Circuits (Pack size - 25) Z4123 INOSYS Calibration kit - complete, disposable. BC4110/KIT/5 Biomed - NEO2 Blend Neonatal Air/Oxygen Blender Part Number Description Z2003/FFEU Low Flow Blender for neonatal use with bleed switch with dual flow meters 1-15 l/min and 1-3.5 l/min 1.5m Oxygen hose with NIST fitting 1.5 m Air hose with NIST Fitting Medirail bracket with vertical/horizontal positioning connector pack. Z2003/FFE5 Low Flow Blender for neonatal use with bleed switch with dual flow meter 1-15 l/min 1.5 m Oxygen hose with NIST fitting 1.5 m Air hose with NIST fitting Medirail bracket with vertical/horizontal positioning connector pack. Z2003/FLEU Low Flow Blender for neonatal use with bleed switch with single flow meter 1-15 l/min and bleed switch 1.5 m Oxygen hose with NIST Fitting 1.5 m Air hose with NIST fitting Medirail bracket with vertical/ horizontal positioning connector pack. Z2003/FFE1 Low Flow Blender for neonatal use with bleed switch with dual flow meters 1-15 l/min and 0-1 l/min. 1.5 m Oxygen hose with NIST Fitting 1.5 m Air hose with NIST fitting Medirail bracket with vertical/horizontal positioning connector pack. Air/Oxygen Blender 6 Tel: +44 (0)20 8681 1414 • [email protected] • Fax: +44 (0)20 8649 8570 • www.sle.co.uk SLE1000 nCPAP Driver & accessories Part Number Description L1009/014/000 SLE1000 Trolley complete with Drip pole, 2 locking wheels and humidifier mounting Z0010/DIS/EXP/4M SLE1000 Air and Oxygen hose set. Set of 2, without hose end. 4m length (DISS) Z0010/NST/EXP/4M SLE1000 Air and Oxygen hose set. Set of 2, without hose end. 4m length (NIST) Z0010/NST/UK/4M SLE1000 Air and Oxygen hose set. Set of 2, with NIST hose end. 4m length (NIST) Z0010/NST/UK/3M SLE1000 Air and Oxygen hose set. Set of 2, with NIST hose end. 3m length (NIST) SLE1000 Z1009/014/000 (Shown without Drip pole) Aeroneb Solo Nebuliser System Part Number Description Z1025/NEB/0UK Aeroneb Solo Starter Kit - UK includes Aeroneb Pro-X control module, 2 Aeroneb Solo nebulisers, 2 adult tee’s with plug, universal bracket, equipment bracket, AC/DC adaptor and manual Z1025/NEB/0IN Aeroneb Solo Starter Kit - International includes Aeroneb Pro-X control module, 2 Aeroneb Solo nebulisers, 2 adult tee’s with plug, universal bracket, equipment bracket, European AC/DC adaptor and English language manual Z1025/NEB/0NE Aeroneb Solo Starter Kit - Northern Europe (French, German, Dutch, Italian) includes Aeroneb Pro-X control module, 2 Aeroneb Solo nebulisers, 2 adult tee’s with plug, universal bracket, equipment bracket, AC/DC adaptor and manual Z1025/NEB/0SE Aeroneb Solo Starter Kit - Southern Europe (Spanish, Italian, Portuguese, Greek, Turkish) includes Aeroneb Pro-X control module, 2 Aeroneb Solo nebulisers, 2 adult tee’s with plug, universal bracket, equipment bracket, AC/DC adaptor and manual Z1025/NEB/0SC Aeroneb Solo Starter Kit - Scandinavia (Swedish, Norwegian, Finnish, Danish) includes Aeroneb Pro-X control module, 2 Aeroneb Solo nebulisers, 2 adult tee’s with plug, universal bracket, equipment bracket, AC/DC adaptor and manual Z1025/NEB/0AU Aeroneb Solo Starter Kit - Australia includes Aeroneb Pro-X control module, 2 Aeroneb Solo nebulisers, 2 adult tee’s with plug, universal bracket, equipment bracket, European AC/DC adaptor and English language manual N1025/100/005 Aeroneb Solo nebulisers (Pack of 5) N1025/200/010 Aeroneb Solo nebulisers (Pack of 10) N1025/035/010 Aeroneb Solo Neonatal Tee Pieces 12 mm M/12 mm F for use with Fisher & Paykel neonatal breathing circuit - Pack of 10 N1025/036/010 Aeroneb Solo Neonatal Tee Pieces 10 mm M /10 mm F for use with Intersurgical circuits (Pack of 10) N1025/400/010 Aeroneb -disposable Luer connectors for continuous nebulisation (Pack of 10) N1025/450/010 Aeroneb - Tee Piece plugs (Pack of 10) L1025/NEB/KIT Aeroneb Starter Kit for SLE4000 & SLE5000, Aeroneb Solo Neonatal Tee Pieces 10 mm M/10 mm F (pack of 10), Aeroneb Solo Neonatal Tee Pieces 12 mm M/12 mm F (Pack of 10) Tel: +44 (0)20 8681 1414 • [email protected] • Fax: +44 (0)20 8649 8570 • www.sle.co.uk Aeroneb Pro-X control module and nebuliser 7 Patient Circuits For use with SLE Ventilators Part Number Description SLE2000 and SLE2000 HFO circuits BC5188/100/15 N2387 15 mm Reusable Heated Patient Circuit for use with SLE2000 and SLE2000 HFO* N2391 10 mm Reusable Heated Patient Circuit for use with SLE2000 and SLE2000 HFO* N2387/60 15 mm Reusable Heated Patient Circuit for use with SLE2000 HFO* BC2188/100/15 10 mm Single Use Patient Circuit for use with SLE2000 and SLE2000 HFO: temp port 100 mm from ET Manifold. (Pack size - 15) BC2188/400/15 10 mm Single Use Patient Circuit for use with SLE2000 and SLE2000 HFO: temp port 400 mm from ET Manifold. (Pack size - 15) SLE2000 HFO+ circuits BC5488/DHW/15 BC2198/100/15 15 mm Single Use Patient Circuit for use with SLE2000 HFO+: temp port 100 mm from ET manifold. (Pack size - 15) BC2198/400/15 15 mm Single Use Patient Circuit for use with SLE2000 HFO+: temp port 400 mm from ET Manifold. (Pack size - 15) Replaces N2252 SLE4000 and SLE5000 circuits N2391/50 10 mm Reusable Heated Patient Circuit for use with SLE5000* N2387/50 15 mm Reusable Heated Patient Circuit for use with SLE5000* BC5488/DHW/15 10 mm Single Use, Dual Heated Patient Circuit, smoothbore tubing for use with SLE4000 and SLE5000. (Pack size - 15) BC5188/400/15 10 mm Single Use Patient Circuit for use with SLE4000 and SLE5000, temp port 400 mm from ET Manifold. (Pack size - 15) Replaces N5188 BC5188/100/15 10 mm Single Use Patient Circuit for use with SLE4000 and SLE5000, temp port 100 mm from ET Manifold. (Pack size - 15) Replaces N5188/02 BC5198/100/15 15 mm Single Use Patient Circuit for use with SLE4000/5000, temp port 100 mm from ET manifold. (Pack size -15) BC5198/400/15 15 mm Single Use Patient Circuit for use with SLE4000/5000, temp port 400 mm from ET manifold. (Pack size -15) RT228/000/010 Fisher & Paykel RT228 Infant Breathing Circuit with chamber for use with SLE4000/5000. (Box of 10) RT228/000/010 * NB Reusable circuits must always be used with the correct reusable flow restrictor (see opposite) Filters For use with SLE Ventilators N2587/000/50 Single Use Bacteria Filter 8 N2029 Autoclavable Bacteria Filter Part Number Description N2029 Autoclavable Fresh Gas Outlet Bacteria Filter for use with SLE5000, SLE2000 & SLE2000 HFO (Each) N2029/60 Autoclavable bacterial filter SLE2000 HFO+. (Each) N2587/000/50 Single Use Bacteria Filter, suitable for all SLE ventilators. (Box of 50) Tel: +44 (0)20 8681 1414 • [email protected] • Fax: +44 (0)20 8649 8570 • www.sle.co.uk Procedure Packs For use with SLE4000 and SLE5000 Ventilators Part Number Description RT228/SEN/010 F&P RT228 circuit bundled with SLE 5302 flow sensor (Pack of 10) BC5188/100/015/SEN Intersurgical BC5188/100/15 circuit bundled with SLE 5302 flow sensor (Pack of 15) BC5188/400/015/SEN Intersurgical BC5188/400/15 circuit bundled with SLE 5302 flow sensor (Pack of 15) BC5488/DHW/015/SEN Intersurgical BC5488/DHW/15 circuit bundled with SLE 5302 flow sensor (Pack of 15) RT228/SEN/010 BC5188/100/015/SEN Parts for Reusable Circuits (Including Reusable Flow Restrictors) Part Number Description N2030/200/001 Proximal Airway Pressure Line reusable N2998/04 10 mm x 100 mm (Fresh gas port to fresh gas filter silicon tube) N2998/10 10 mm x 250 mm (Extension Tube Restrictor to Temp Probe) N2998/24 10 mm x 610 mm (Humidifier to Ventilator) reusable Silicon Tube N2998/30 10 mm x 760 mm (Expiratory Manifold to Water Trap or Water Trap to Exhalation Block) reusable Silicon Tube N2998/48 10 mm x 1220 mm (Temperature Port to Chamber Connector) reusable Silicon Tube N3049 Hose Clip (Pack of 3) N3071 Draw Wire for Heated Wire Insertion N3139 Reusable Water trap N3145 Reusable Neonatal Manifold N3146 Tube Connector and Temperature Probe Assembly N3148 Tube Connector Adaptor 10 mm Male to 10 mm Female N3510 Reusable Heater Wire 1200 mm and Chamber Connector N2266/50 Amber metal restrictor for use with 10 mm reusable circuit for SLE5000 N2263 Blue metal restrictor for use with 15 mm reusable circuit for SLE2000/ SLE2000 HFO/SLE2000 HFO+ N2266 Red metal restrictor for use with 10 mm reusable circuit for SLE2000/ SLE2000 HFO/SLE2000 HFO+ Tel: +44 (0)20 8681 1414 • [email protected] • Fax: +44 (0)20 8649 8570 • www.sle.co.uk N3510 Heater wire and chamber connector N3049 Hose clips N2266/50 Amber Restrictor N3148 Tube connector adaptor N3146 Temperature probe adaptor 9 Fisher & Paykel Humidification systems Z1012/31 MR850 humidifier N3220/000/050 Single use chamber N3290/01/40 Single use autofeed chamber Part Number Description Z1002/11 or Z1002/10 (UK) F&P MR850 humidifier for use with reusable patient circuits (Pole clamp) Fisher & Paykel MR850 heater base, pole clamp, reusable chamber x 1, electrical adaptor MR858 x 1, airway temperature probe, flow probe adaptor and user manual Z1002/31 or Z1002/30 (UK) F&P MR850 humidifier for use with reusable patient circuits (Medirail clamp) Fisher & Paykel MR850 heater base, Medirail clamp, reusable chamber x 1, electrical adaptor MR859 x 1, airway temperature probe, flow probe adaptor and user manual Z1012/11 or Z1012/10 (UK) F&P MR850 humidifier for use with single use patient circuits (Pole clamp) Fisher & Paykel MR850 heater base, pole clamp, single use chamber x 1, electrical adaptor MR859 x 1, airway temperature probe, flow probe adaptor and user manual Z1012/31 or Z1012/30 (UK) F&P MR850 humidifier for use with single use patient circuits (Medirail clamp) Fisher & Paykel MR850 heater base, Medirail clamp, single use chamber x 1, electrical adaptor MR859 x 1, airway temperature probe, flow probe adaptor and user manual N3901 Heated wire adaptor for use with MR700 and SLE reusable patient circuits with clover leaf connector (each) N3030 Pole Clamp for F&P MR850 Humidification System (each) N6627/08 Rail Clamp for F&P MR850 Humidification System (each) N3220/000/050 F&P single use humidifier chamber MR225 (50 in a box). N3290/01/40 F&P autofeed single use humidifier chamber MR290 (40 in a box) N3340 F&P Reusable Humidification Chamber (each) N3860 52” Temperature probe for use with MR850. (each) N3835 N3858 Electric adaptor for use with MR850 and SLE reusable patient circuits N3859 Electric adaptor for use with MR850 and SLE single use patient circuits with flying lead connector N5600 Electric adaptor for use with MR850 and SLE single use patient circuits with clover leaf connector N5601 Electric adaptor for use with MR850 and SLE single use dual heater wire patient circuits with clover leaf connectors N5603 Electric adaptor for use with MR730 and SLE single use patient circuits with clover leaf connector N5604 Electric adaptor for use with MR730 and SLE single use dual heater wire patient circuits with clover leaf connectors N6627/08 Rail clamp N3030 Pole clamp 10 Tel: +44 (0)20 8681 1414 • [email protected] • Fax: +44 (0)20 8649 8570 • www.sle.co.uk SLE1000 nCPAP Generator Nasal CPAP Generator with enhanced fluidic flow technology Part Number Description Generators BH6000/600/010 SLE1000 nCPAP Generator Only (inc 3 prongs). (Pack of 10) BH6300/605/010 SLE1000 nCPAP Generator with Fisher & Paykel RT124 spiral heated wire circuit. (Pack of 10) BH6400/605/010 SLE1000 nCPAP Generator with Fisher & Paykel RT324 spiral heated wire circuit and 290 autofill chamber. (Pack of 10) BH6600/600/020 SLE1000 nCPAP Silencer. (Pack of 20) RT124/000/010 Fisher & Paykel RT124 spiral heated wire circuit. (Pack of 10) SLE1000 nCPAP Generator Prongs BH1P00/600/010 SLE1000 nCPAP nasal prongs, small. (Pack of 10) BH2P00/600/010 SLE1000 nCPAP nasal prongs, medium. (Pack of 10) BH3P00/600/010 SLE1000 nCPAP nasal prongs, large. (Pack of 10) BH6400/605/010 Kit Masks BH4M00/600/010 SLE1000 nCPAP masks, small. (Pack of 10) BH5M00/600/010 SLE1000 nCPAP masks, medium. (Pack of 10) BH6M00/600/010 SLE1000 nCPAP masks, large. (Pack of 10) BH7M00/600/010 SLE1000 nCPAP masks, extra large. (Pack of 10) Prongs Bonnets BH1000/600/010 l SLE1000 nCPAP white bonnet, size 000. (Pack of 10) BH0100/600/010 l SLE1000 nCPAP grey bonnet, size 00. (Pack of 10) BH0110/600/010 l SLE1000 nCPAP pink bonnet, size 0. (Pack of 10) BH0001/600/010 l SLE1000 nCPAP brown bonnet, size 1. (Pack of 10) BH0002/600/010 l SLE1000 nCPAP yellow bonnet, size 2. (Pack of 10) BH0003/600/010 l SLE1000 nCPAP blue bonnet, size 3. (Pack of 10) BH0004/600/010 l SLE1000 nCPAP gold bonnet, size 4. (Pack of 10) BH0005/600/010 l SLE1000 nCPAP green bonnet, size 5. (Pack of 10) BH0006/600/010 l SLE1000 nCPAP burgundy bonnet, size 6. (Pack of 10) BH0007/600/010 l SLE1000 nCPAP orange bonnet, size 7. (Pack of 10) BH0008/600/010 l SLE1000 nCPAP dark green bonnet, size 8. (Pack of 10) BH0009/600/010 l SLE1000 nCPAP navy bonnet, size 9. (Pack of 10) BH1000/STP/001 Bonnet Sampler pack. (Pack of 36) (includes 3 of each bonnet size plus 10 x tapes) Tel: +44 (0)20 8681 1414 • [email protected] • Fax: +44 (0)20 8649 8570 • www.sle.co.uk Masks Silencer Bonnets SLE1000 nCPAP Generator and bonnet in use 11 Inca Nasal CPAP system UK only Part Number Description Includes: Choice of Nasal Cannulae Size, Stay Flex tubing, Knit Cap, Support Foam Blocks, in-line T and straight Adaptor, Sterile Nasal Prongs. Inca nCPAP System N4427/07 Inca Nasal CPAP (Size 7.5) with nasal cannulae (Pack of 5) N4427/09 Inca Nasal CPAP (Size 9.0) with nasal cannulae (Pack of 5) N4427/10 Inca Nasal CPAP (Size 10.5) with nasal cannulae (Pack of 5) N4427/12 Inca Nasal CPAP (Size 12.0) with nasal cannulae (Pack of 5) N4427/15 Inca Nasal CPAP (Size 15.0) with nasal cannulae (Pack of 5) Replacement Prongs N4407/07 Replacement prongs and tubing. Size 7.5 (Pack of 5) N4407/09 Replacement prongs and tubing. Size 9.0 (Pack of 5) N4407/10 Replacement prongs and tubing. Size 10.5 (Pack of 5) N4407/12 Replacement prongs and tubing. Size 12.0 (Pack of 5) N4407/15 Replacement prongs and tubing. Size 15.0 (Pack of 5) Adapts a ventilator circuit to give nasal CPAP. Cannulaide Nasal seal for infant nCPAP UK only Cannulaide Nasal Seals Part Number Description N4410/100/25 Size 0 for babies up to 700 g (Pack of 25) N4410/101/25 Size 1 for babies between 700 g and 1250 g (Pack of 25) N4410/102/25 Size 2 for babies between 1250 g and 2000 g (Pack of 25) N4410/103/25 Size 3 for babies between 2000 g and 3000 g (Pack of 25) N4410/104/25 Size 4 for babies more than 3000 g (Pack of 25) Gentle hydrocolloid nasal seal aids continuous recruitment of alveoli and prevents damage to nasal septum. 12 Tel: +44 (0)20 8681 1414 • [email protected] • Fax: +44 (0)20 8649 8570 • www.sle.co.uk Neo-fit Neonatal Endotracheal tube grip Part Number UK only Description Includes: Plastic Tube Grip with Adjustable Velcro Strap, Adhesive Foam Pads x 2 Foam Lollipop Securing tapes N4225/40 NEO-fit (packed non-sterile 20 in a box) Provides rapid, secure stabilisation N4225/40 NEO-fit ET tube grip Neo-Prep Neonatal skin preparation tabs Part Number UK only Description Includes: Plastic Tube Grip with Adjustable Velcro Strap, Adhesive Foam Pads x 2 Foam Lollipop Securing tapes N4480/00 NEO-prep skin barrier SMALL (Box of 10) N4480/01 NEO-prep skin barrier LARGE (Box of 10) Hypoallergenic skin barrier tabs precut to small and large sizes for use during nasal cannulae procedures. NEO-Prep skin prep tabs Sticky Whiskers Nasal cannula securement device Part Number Description N4406 Sticky Whiskers - Nasal cannula securement device (pack of 25) N4406/MW1/001 Mini Whiskers - Nasal cannula securement device (pack of 25) UK only Gentle hydrocolloid adhesive strips to secure cannula in place directly under the infant’s nose N4406 Sticky Whiskers Tel: +44 (0)20 8681 1414 • [email protected] • Fax: +44 (0)20 8649 8570 • www.sle.co.uk 13 Medin Miniflow Kit For nasal CPAP use with any Ventilator Part Number Description Z1026/MNF/001 Miniflow nCPAP Generator kit for use with any ventilator 10 x Miniflow device with angled adaptor, head measuring tape and includes: Prongs micro - Qty 1. Prongs small - Qty 2. Prongs medium - Qty 2. Prongs large - Qty 2. Prongs Xlarge - Qty 2. Prongs wide (Asia) - Qty 1 Neonatal mask small - Qty 1. Neonatal mask medium - Qty 1. Neonatal Mask large - Qty 1. Bonnet xsmall - Qty 1. Bonnet small Qty 1. Bonnet medium - Qty - 1. Bonnet large - Qty 1. Bonnet xlarge - Qty 1. Bonnett xxlarge - Qty 1. Bonnet for fixation - Qty 1, T-piece - Qty 10 Medin Miniflow Humidification Disposable Humidifiers Part Number Description N2327 Disposable humidifiers (pack of 50) N2327 Disposable Humidifier TSI Ventilator Test Systems Certifier Plus Part Number Description Z4080 Certifier FA Plus, Flow Analyser System: 4088 Interface model and 4081 High Flow module kit Z4073 Certifier FA, Oxygen Sensor kit (4073) Z4082 Certifier FA Plus, Low Flow Module kit (4082) A low cost portable test system capable of testing multiple parameters of ventilation performance Z4080 Certifier FA Plus 14 Tel: +44 (0)20 8681 1414 • [email protected] • Fax: +44 (0)20 8649 8570 • www.sle.co.uk SLE is a world leader in the design and manufacture of neonatal ventilators. Years of ventilation experience have given the company an understanding of the challenges facing nurses and clinicians when caring for the tiniest and most critical babies. From being pioneers of neonatal Patient Triggered Ventilation (PTV) in the 1980’s, to the introduction of combined HFO (High Frequency Oscillation) in the 1990’s, SLE has maintained a position of strength in neonatal ventilation. The knowledge and experience gained during years of development is evident in all of SLE’s products: the result of our ongoing commitments to innovation, competency and care. G0052/0UK/001 04/12 SLE Limited. Twin Bridges Business Park, 232 Selsdon Road, South Croydon Surrey CR2 6PL UK Telephone:+44 (0)20 8681 1414 • Fax: +44 (0)20 8649 8570 E-mail: [email protected] • Web: www.sle.co.uk