Download Rev D - AMETEK Programmable Power

Installation Manual - Rev D
California Instruments
2.6.4 MX45-3 and and MX45-3Pi 3ø mode Output Wiring Diagram
Figure 2-8 shows the required output connections for a MX45-3 three phase or a MX45-3Pi in
three phase mode output configuration (rear-view perspective). See section 2.6.2 for the MX453Pi in single-phase mode.
Always disconnect all input power from the MX45 before removing the front panel cover that
provides access to the input and output terminal connections. Route the wires from the back of
the MX45 to the front in the provided cable guides.
Figure 2-8: MX45-3 Output Wiring
MX Series
17