Transcript
The GigRig Ltd Unit 85 Basepoint Business Centre Swindon SN5 7EX TheGigRig G2 Bank Manager Thank you for purchasing TheGigRig G2 Bank Manager The G2 Bank Manager is a very easy way to remotely access the 8 banks of pre-sets on TheGigRig G2 Setting up you Bank Manager is so simple. Just plug a patch cable between the Bank Manager and the Bank Up input on the back panel of G2. The Bank Manager will now work exactly as the Bank Up switch on the front panel of G2. Once connected simply press the Bank Manager, then on G2, select the bank you want access to. < Connect G2 Bank Manager here Your G2 Bank Manager FootSwitch is fully guaranteed for 1 year. This guarantee does not cover ‘physical abuse’. Small Print: The GigRig LTD will not accept liability for damage or injury caused by any use or misuse of this product or from damage or injury caused by any equipment used in conjunction or connected to this G2 Bank Manager Footswitch product. No compensation can be claimed for loss of signal before or within any performance. Specification: TheGigRig G2 Bank Manager Footswitch uses a standard centre negative 9V dc power supply to illuminate the LEDs but the device will still toggle the banks of G2 if its unpowered. Dimensions – 12cm x 6cm x 3cm Approved. Fully compliant with RoHS√ (lead free product.) All the very best from Dan and The Team at TheGigRig. www.thegigrig.com
