Download KX-TA1232 Programming Guide

General Programming
[151]
Break Service Starting / Ending Time
Description
Sets the Break starting and ending time for each day of the week.
Selection
• Day of the week selection number:
1 (Sunday) / 2 (Monday) / 3 (Tuesday) / 4 (Wednesday) / 5 (Thursday) / 6 (Friday) / 7
(Saturday) / (every day of the week)
• Hour: 1 through 12
• Minute: 0 through 59
• AM / PM
Default
Every day of the week – 3:00 – 3:29 PM
Programming
1. Enter 151.
Display: 151 BREAK TIME
2. Press NEXT.
Display: Day of Week?
3. Enter the day of the week selection number.
To select Sunday, you can also press NEXT.
Display example: Sun-BGN: 3:00PM
4. Enter the hour of starting time.
To change the current entry, press CLEAR and enter the new time.
5. Press
.
6. Enter the minute.
To change the current entry, press CLEAR and enter the new minutes.
7. Press
.
8. Press SELECT for AM or PM.
9. Press STORE.
10.To program another break mode or day of the week, press NEXT or PREV, or SELECT
and the day of the week selection number.
11.Repeat steps 4 through 10.
12.Press END.
Programming Guide
79