Download manual_srp-330_command_rev_1_01 (USA)

SRP-330
DLE DC4
Function:
Code:
Generate pulse at real-time
ASCII
Hex
Decimal
DLE
10
16
DC4
14
20
n
n
n
m
m
m
t
t
t
Range:
n = 1, m=0,1, 1 ≤ t ≤ 8
Default:
None
Description:
■
Output the pulse specified by t to connector pin m as following:
m
Connector pin
0
Drawer kick-out connector pin 2
1
Drawer kick-out connector pin 5
■
This command generates the drive pulse to connector pin m with pulse width defined by t as following:
• Drawer kick-out connector pin 2 is selected with m=0 while pin 5 chosen for m=1.
• Pulse ON time is [t x100 ms] and OFF time [t x100 ms].
Remarks:
■
■
Upon receiving this command, the printer outputs the drive pulse to the specified connector pin.
The real time command is stored into the receive buffer and executed with higher priority than other commands.
Differences:
None
Rev. 1.01
BIXOLON
- 15 -