Download AK-ST7FMC User`s Manual

AK-ST7FMC User's Manual
Note: the default parameters in the AK-ST7FMC Control Panel are suitable
for driving the optional SELNI motor. The V/f curve and/or voltage level may
therefore not be suited for your own single-phase motor. Several trials with
increasing voltage levels will then be needed to start-up and run your motor.
Congratulations! You have successfully completed this tutorial! You can now
continue to experiment with the AK-ST7FMC Control Panel on your own.
Additionally, you can develop and debug your own application by installing
the “inDART-STX for ST7” software (which includes a complete development
toolchain) present on the SofTec Microsystems “System Software” CDROM.
6
Page 53