Download "user manual"

Lubrication system FAG CONCEPT8
Figure 33
Example of new PIN: 111
48
BA 36
The factory setting of the PIN is 000, see page 59.
The PIN can be changed in the menu Pro as follows, Figure 33:
 Press the SELECT key as often as necessary until the display shows
PIN.
 Press the ENTER key.
 Press the SELECT key in order to change the first value.
 Press the ENTER key to confirm.
 Press the SELECT key in order to change the second value.
 Press the ENTER key to confirm.
 Press the SELECT key in order to change the third value.
 Press the ENTER key to confirm.
 The display will flash twice for confirmation of the value.
The changed PIN has been saved.
0007C3BF
Changing the PIN
Schaeffler Technologies