Download FBR-1461 - Mayflex
Transcript
Factory Default Settings Before configuring the FBR-1461 router, you need to know the following default settings. Web Interface: (Username and Password) Username: admin Password: password The default username and password are “admin” and “password” respectively. Attention: If you ever forget the username/password to login to the router, you may press the RESET button up to 6 seconds then release it to restore the factory default settings. Caution: After pressing the RESET button for more than 6 seconds then release it, to be sure you power cycle the device again. LAN Device IP Settings: IP Address: 192.168.0.1 Subnet Mask: 255.255.255.0 ISP setting in WAN site: PPPoE DHCP Server: DHCP server is enabled. Start IP Address: 192.168.0.2 IP pool counts: 253 21