Download user manual - epro-31 10k / 20k / 30k

USER MANUAL - EPRO-31 10K / 20K / 30K
FUNCTION DISPLAY ACCORDING TO OPERATION MODE
In each mode UPS will show some different alternating screens as described below:
Operating mode/status
UPS Power On
Description
When UPS is powered on, it will enter into this mode for a few seconds as initializing the CPU and
system.
LCD display
No-output mode
Description
When bypass voltage/frequency is out of acceptable range or bypass is disabled (or forbidden), UPS
will enter into no-output mode if powering on or turning off the UPS. It means the UPS has no output.
Alarm beeps every two minutes.
LCD display
Only if UPS is connected to parallel system
www.integra-ups.com
130805-EPRO-31 10K/20K/30K (ENGLISH) - 29