Download Anthogyr guiding system user procedures

19
> E.6 Tapping (Optional and only for G implants )
Choose the centering ring that is adapted to the diameof the guiding tube (see §E.1) and assemble it on the
tap.
ter
Fit the tap in the contra-angle
E
Raise the contra-angle drill stop to the highest
position .
Tap at 25 rpm to the visual depth mark corresponding
to the length of the implant.
Once the mark is reached, remove the guide tap in the
"reverse" mode.
E
It is important not to use the drill stop due to the risk of
blockage occurring on the guide and deteriorating the
threading made by the tap by its rotation on the spot.