Download Service/Downloads/Documents/Data-sheets

Transcript
ZES current and voltage sensors and accessories
This data book is the technical dokumentation of the current and voltage sensors from ZES
ZIMMER Electronic Systems GmbH to enlarge the measuring ranges of the power meters
series LMG.
The first section of this paper gives an survey of all ZES current sensors and the safety
precautions. Selection table and several arguments should help you to find a suitable sensor
family or fill out the support request form. The second section is about the general current
sensors, which you can use with every precision power meter of the LMG series. In the
following sections the special sensors, wiring cables and accessories for the different precision
power meters are described. Then you find a chapter with the precision high voltage divider
for meters of the LMG series. The last section with frequently asked questions will help you to
optimize the accuracy and give you some hints for the usage of our sensors.
But in all cases if you need more information or detailed support for your application please
don’t hesitate to contact us, the engineers of ZES ZIMMER will help you.
© Copyright 2014. No part of this document may be reproduced, in any form or by any means,
without the permission in writing from ZES ZIMMER Electronic Systems GmbH.
We reserve the right to implement technical changes at any time, particularly where these
changes will improve the performance.
• Headquarter Germany:
ZES ZIMMER Electronic Systems GmbH
Tabaksmühlenweg 30
D-61440 Oberursel (Taunus), Germany
phone ++49 (0)6171 628750
fax ++49 (0)6171 52086
email: [email protected]
internet: http://www.zes.com
• Subsidiary USA:
ZES ZIMMER Inc.
2850 Thornhills Ave. SE
Suite 114
Grand Rapids, MI 49546, USA
phone +1 760 550 9371
email: [email protected]
internet: http://www.zes.com
ZES ZIMMER
2/96
Sensors and Accessories for precision power meters