Download Introduction

●
Printer Method
Factory default: Print to System Printer
●
◦
Print to File Send print data to a file.
◦
Print to System Printer Send print data to the printer connected to your system.
◦
Print to Serial Device Send print data to a serial device.
◦
Print to LinePrinter Device Send print data to a line printer (LPT) device.
◦
Print to LPR Send print data to a network printer.
Throw page on close
Factory default: Unchecked
When this option is checked, a form feed will be issued when closing the printer. This is required
for most page printers.
●
Remove Trailing Spaces
Factory default: Unchecked
When this option is checked, any trailing spaces will be removed before the line is sent to the
printer.
●
Wait for printer to close
Factory default: Unchecked
This option is only available when either the Print to Serial Device or the Print to LinePrinter
Device printer method is selected. When this option is checked, all other processing will be
blocked during printing. Please note that the application will be locked during a close if the
buffers require flushing.
●
ENWW
Close delay
Emulation Printer Settings
57