1
Download SYSDRIVE JX Series
Transcript
4-2 Function Mode Register No. Function name Parameter No. R/W Function 10A6h Allowable momentary power interruption time b002 R/W 3 to 250 0.1 [s] 10A7h Retry wait time b003 R/W 3 to 1000 0.1 [s] 10A8h Momentary power interruption/undervoltage trip during stop selection b004 R/W 00: Disabled 01: Enabled ⎯ 10A9h Momentary power interruption retry time selection b005 R/W 00: 16 times 01: No limit ⎯ 1170h Starting frequency at frequency pull-in restart b011 R/W 00: Frequency at interruption 01: Max. frequency 02: Set frequency ⎯ 10ADh Electronic thermal level b012 R/W 2nd electronic thermal level b212 R/W 2000 to 10000 Set the rated current to 10000 0.01 [%] 1527h 10AEh Electronic thermal characteristics selection b013 R/W 1528h 2nd electronic thermal characteristics selection b213 R/W 10B5h Overload limit selection b021 R/W 1529h 2nd overload limit selection b221 R/W 10B6h Overload limit level b022 R/W 152Ah 2nd overload limit level b222 R/W 10B7h Overload limit parameter b023 R/W 152Bh 2nd overload limit parameter b223 R/W 10BBh Overload limit source selection b028 R/W 00: Set values in b022 01: Input FV terminal ⎯ 152Ch 2nd overload limit source selection b228 R/W 00: Set values in b222 01: Input FV terminal ⎯ 1171h Deceleration rate constant at frequency pull-in restart b029 R/W 1 to 30000 1172h Frequency pull-in restart level b030 R/W 200 to 20000 Functions 4 Monitor or data range 00: Reduced torque characteristics 1 01: Constant torque characteristics 02: Reduced torque characteristics 2 00: Disabled 01: Enabled in acceleration/constant speed operation 02: Enabled in constant speed operation 2000 to 15000 Set the rated current to 10000 1 to 300 4-99 Resolution ⎯ ⎯ ⎯ ⎯ 0.01 [%] 0.1 [s] 0.1 [s] 0.01 [%]
