Download Guide to Operations

11
UNPACKING & INSTALLATION
2
2.1
Inspection of Boxes
After you have received your order from New Brunswick Scientific (NBS), inspect
the boxes carefully for any damage that may have occurred during shipping. Report
any damage to the carrier and to your local NBS distributor immediately.
2.2
Unpacking
CRUSH WARNING!
At least four people are required to safely lift your Galaxy 170 S.
Disassemble the wooden shipping crate and remove the protective packing. Save the
packing materials for possible future use, and be sure to save this User’s Guide for
instruction and reference.
To simplify lifting the incubator, leave it on the pallet as you install the four lifting
handles provided (see Figure 1a) by screwing them fully into the tapped holes on both
sides. You must have at least two persons at either side to safely lift the incubator.
Supported by the lifting handles only, lift the incubator from the delivery pallet.
Figure 1a: Removable Lifting Handles
1
1
Rear of incubator
2
2
Removable lifting handles
CAUTION!
NEVER try to lift the incubator by its door; this would cause permanent
damage to the incubator.
New Brunswick Scientific
User Guide