Download User manual - Sams elektronik doo

Converters
elektronik
INSTALLATION (STANDALONE)
For the best signal quality use:
- Belden 8281 or better coaxial cable for analog video
- Belden 1694A or better coaxial cable for digital video
1
Connect the power cord.
The device works only on AC ~ 230 V / 50 Hz.
AC ~230V/50Hz
ANALOG OUTPUT
Y
BLUE
U
C
RED
V
SDI OUTPUT
CVBS
GREEN
Y
SDI INPUT
SN:
www.sams.rs
Made in Serbia
DA-12s
POWER
USE ONLY WITH A 250V FUSE
FUSE: 500mA
Connect all necessary connectors
before the unit is turned on.
3
Turn on the device
by pressing switch.
2
Rear side
Connectors on rear side
C
RED
V
ANALOG OUTPUT
Y
BLUE
U
CVBS
GREEN
Y
UP
DOWN
SDI INPUT
SDI input
OK / SAVE
MENU / BACK
SDI output
Analog inputs
The device supports composite and component signal
(CVBS&YC, RGB, YUB/BETA)
SDI OUTPUT
DIGITAL TO ANALOG
DA12
SDI~CvYC
12/10bit digital to multiformat analog converter with frame sinchronizer
DA-12fss
www.sams.rs
Front side
4
14
If everything is OK, the LED will glow green.
Sams elektronik d.o.o. • [email protected] • www.sams.rs
DAC