Download 4 - Impression Solutions, Inc.

Printing Data on a USB Memory Device
Changing the Number of Copies
(Copies)
2 Press the scroll button
to select
[Binding] then press the <ENTER>
button.
You can set the number of copies to be printed.
1 Press the scroll button
to select [Print
Setup] then press the <ENTER> button.
3
3 Press the scroll button
to select [Long
Edge] or [Short Edge], then press the
<ENTER> button.
3.Printing
2 Press the scroll button
4 Press the <BACK> button to return to
3 Enter the number of copies then press
Fitting the Page Size into the Paper
Size (Fitting)
to select
[Copies] then press the <ENTER>
button.
the Start screen.
the <ENTER> button.
You can fit the page size into the paper size and
print.
You can assign up to 999.
4 Press the <BACK> button to return to
If the page size of a file to be printed is too large
or small for the effective printing area of the
paper, fitting will be automatically performed to
fit the page size into the paper size.
the Start screen.
Memo
●● The selectable trays are as follows:
--Tray 1 (Factory default setting)
Note
●● This setting will not be available for printing of a PRN file.
--Trays 2–4 (when additional trays are installed)
--MP Tray
Memo
●● The default setting of this function is [On].
Duplex Printing (Duplex)
1 Press the scroll button
to select [Print
Setup] then press the <ENTER> button.
You can select either single-sided or duplex
printing.
2 Press the scroll button
Note
●● For printing of a PRN file, single-sided/duplex printing
designated in the printer driver when the file to be printed
was created will be selected.
to select [Fit]
then press the <ENTER> button.
3 Press the scroll button
and select [On]
to enable the fitting function and [Off]
to disable it, then press the <ENTER>
button.
1 Press the scroll button
to select [Print
Setup] then press the <ENTER> button.
2 Press the scroll button
to select
[Duplex] then press the <ENTER>
button.
4 Press the <BACK> button to return to
the Start screen.
3 Press the scroll button
and select [On]
for duplex printing or [Off] for singlesided printing, then press the <ENTER>
button.
4 Press the <BACK> button to return to
the Start screen.
Binding Setting (Binding)
The binding position can be set for duplex
printing.
1 Press the scroll button
to select [Print
Setup] then press the <ENTER> button.
- 80 -