Download SECURITY ENERGIZER
Transcript
JVA ELECTRIC FENCE SYSTEMS 3. SPECIFICATIONS Energizer Output Voltage Peak Output Energy Pulse Rate 12v DC Power Consumption Outputs Enclosure Size Weight – packed, no battery Recommended operating temperature ] [ ] [ for a while after switching off, and to wait for at least 10 minutes before opening the case. ] ; % [ fence, it is recommended that the energizer be turned off WARNING and an intentional short circuit be placed from the fence live wires to earth. This is a sensible precaution against the energizer being turned on by others or malfunctioning while work on the fence is in progress. ] * sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. ] $ [ appliance. ] = ^ between two separate electric fences, each powered by separate energizers, "_ * ^ mode. AC Power Input Battery Charger Output 8.5kV peak no load 8 Joules Locked at 0.9 Hz Energizer On – 870mA average, 1220mA peak Energizer Off – 28mA Not including keypad or auxiliary power 16Vac 2A Float voltage 14v, 700mA, short circuit protection Reverse battery protection 3 × 12V 2.5A maximum combined load 3 × 30V 1A changeover relay contacts IP4x ABS plastic 300mm high, 190mm wide, 115mm deep 2.5kg From -15°C to +50°C 5