1
Download Coordinate lists
Transcript
Chapter 11. Calculation jobs Intersection by oriented directions This job serves to calculate the coordinates by intersection by oriented directions. Before the calculation, you have to orient the sets on both stations using the method described in the polar method. In the dialog window, data on only one station is always displayed; you can switch to the other one by pressing the button (Station A/B). If both the sets are oriented, you can calculate the individual calculated points by dragging the measured directions from the measured data lists, and pressing the but-ton (calculation). If a minimum angle is set in the selected toleration set, the program will compare it with the real angle and, if necessary, it will display an error message. 51
