Download TDC502

Transcript
User Manual - TDC502
MSC
Page 51 of 68
8.2 Resolution
8.2.1 How to calculate the Resolution
The TDC’s resolution RES is calculated using the divided calibration clock period tCAL and the
calibration values CAL and OFFSET:
RES = tCAL / (CAL – OFFSET) (A0)
8.2.2 Voltage Dependence
Table 8.4 shows the voltage dependence of the Normal-Resolution at normal conditions (typical
process, ambient temperature approx. 28°C), arised from averaging the measured resolution of several TDCs.
Supply Voltage
[V]
2,7
3,0
3,3
3,6
4,0
4,5
5,0
5,5
Normal-Resolution
[ps]
335
293
264
242
220
201
186
177
Table 8.4: Resolution Voltage Dependence (TA ≈ 28°C, typ.)
At Half-Resolution the specified values of Table 8.4 have to be doubled, at High-Resolution the
values have to be shortened by half and at Smart-Resolution they have to be shortened to the fourth
part.
8.2.3 Temperature Dependence
The Normal-Resolution increases by factors of approx. 0,6 ps/K at VDD = 3,3V and approx. 0,4
ps/K at 5V. At Half-Resolution the factors have to be doubled, at High-Resolution the factors have
to be shortened by half and at Smart-Resolution they have to be shortened to the fourth part.
TDC502RefManEngV26.doc
Version: 2.6
Author: AP