Download here - Adam Morse
Transcript
Sensor.asm ; ; Sensors.asm - definitions functions used to configure and/or read the sensors ; LIST P=PIC18F46K22 ; list directive to define processor #INCLUDE <P18F46K22.INC> ; processor specific variable definitions #INCLUDE "AutonomousTrailer.inc" ; Definitions for our project ; ; Define entry points that will be accessible from outside this file ; global SensorInit, SensorRead ; ; Start of the code section ; Code ; ; Function: ; ; Purpose: ; ; Parameters: ; ; Returns: ; ; Notes: ; SensorInit: SensorInit To initialize the sensor configuration None Nothing of any value None ; ; Configure portA for input and set first bit for analog input ; clrf PORTA,A clrf ANSELA,A bsf ANSELA,ANSA2 bsf TRISA,RA2 ; ; Configure ADCON2: ; ; b7='1' - Right justified output ; b6='0' - unimplemented ; b5-3='100' - 8 TAD ; b2-0='020' - Conversion clock= FOSC/32 ; movlw B'10100010' movwf ADCON2,A ; ; Configure ADCON1: ; ; b7='0' - use CCP5 trigger ; b6-4='000' - unimplemented ; b3-2='00' - use internal AVdd for A/D Vref+ ; b1-0='00' - use internal Avss for A/D Vref; movlw B'00000000' movwf ADCON1,A ;Configure ADCON1, Internal ref ; ; Configure ADCON0: ; ; b7='0' - unimplemented ; b6-2='00010' - use AN2 for analog input ; b1='0' - No conversion in progress yet ; b0='1' - ADC is enabled ; movlw B'00001001'