Download MicroTHERM users manual

Transcript
MicroTHERM users manual
Two Main Screens of MicroTHERM
There are two main screens shown in the software, the ‘MONITOR’ screen is used to view live all of the output channel
states, input values, alarm status, activate data log (to PC) and to select menu functions.
Pressing any output channels ‘setup’
button (highlighted) will open the
‘setup’ screen for the selected channel.
The ‘SETUP’ screen displays each output channels settings. It shows the input channel that’s allocated and if a predefined sensor is connected (or just the voltage input) and can display the live reading to assist setup. The output
channels mode (switched or variable speed), its control settings and display options are performed in this screen.
www.dtec.net.au
14