Download FC-138/418

Transcript
SHORTCUT OPERATIONS
Add/delete scan list
In channel mode, press
key to enter FUNC setting. Then, press
key to
add current channel into scan list or delete current channel from the scan list.
1.When “A” is displayed on the LCD, it means that current channel is added into
the scan list and will be scanned.
2.When “A” disappears, current channel is deleted from the scan list and
won’t be scanned.
Note: When editing channels in VFO mode, you can preset the editing channel as on or out of the scan list.
Priority Scan
Under channel mode, after pressing
key, the top left corner of LCD displays
and then press
key to enter priority scan. Under priority scan state, it tests priority channel once scanning per 10
channels. When the priority channel receives a matching signaling, transceiver will stop scanning until
current signal disappear (Please refer to scan setup.).
NOTE: If you want to have this function available, you should set priority channel, otherwise, this
operation will be only as general channel scan. Under frequency mode (VFO) ,this function is unavailable.
(Please refer to priority channel setup.)
TX Power Selection
After pressing
key, the top left corner of LCD displays
/ Middle power / Low power.
30 Professional
FM Transceiver
and then
key to choose High power