Download Fibre to SAS/SATA RAID Subsystem User Manual

Fibre to SAS/SATA Disk Array
Main Menu
The main menu shows all function that enables the customer to execute actions by
selecting the appropriate menu option.
NOTE: The password option allows user to set or clear the Di s k
A rray ’s password protection feature. Once the password has
been set, the user can only monitor and configure the Disk Array
by providing the correct password. The password is used to
protect the Disk Array from unauthorized access. The controller
will check the password only when entering the Main menu
from the initial screen. The Disk Array will automatically go
back to the initial screen when it does not receive any command
in twenty seconds. The Disk Array’s factory default password is
set to 00000000.
User Manual
71