Download USER MANUAL

Quick Start Guide
Item Number: IV-DVFH6100IR-700G
Thank you for purchasing our products.
Please read this Quick Start Guide carefully before operating.
Safety Precaution
Warning

To prevent fire or shock hazard, please do not expose the unit into the
water for a long period of time.

Please make sure the adapter is consistent with product specifications,
otherwise it might cause fire, electric shock or damage.

Pay attention to polarity of the adapter, it might cause some accidents like
fires.

Please don’t connect multiple cameras with the same adapter at the
same time; overloading of adapter capacity may cause fires.


Power supply must be firmly fixed to prevent fire.
If the device gets abnormal smell or smoke, please stop it immediately
and contact with our customer service center.

If the camera doesn’t work as usual, please do not dismantle /
disassemble it by yourself. Please contact our local distributor or our
maintenance office authorized by our company, otherwise the warranty is
voided.

Please do not splash water on the product components when cleaning.
Technical Specifications
Item Number:
Signal System:
Sensor CCD:
Horizontal resolution:
Lens:
Minimum Illumination:
S/N Ratio:
Distance:
LED:
Video Output:
Connector video :
Operation Temperature:
Supplied Power:
IV-DVFH6100IR-700G
NTSC
Sony Effio-E
700TV lines
2.8-12mm
0 LUX (IR ON)
More than 48 Db
100 feet
36PCS LED
1Vp-p 75Ω . Y/C Separated
BNC
-4°F to +122°F
12VDC(+/-10%)
Installation
1. Connect the BNC end of the Camera Cable to an extension cable, or
directly to a DVR / Observation System or to a TV/Monitor.
2. Attach the base to the wall/ceiling, then mount camera to base.
3. Rotate lens to desired position and tighten the set screw to prevent
rotation.
Troubleshooting
1. No picture or unstable - Check the connections.
2. The image is so blurred
a. Checking is there something dirt on the lens, then use customized lens
paper or cotton buds with alcohol drenched to clean.
b. Check the focus length and OSD settings
3. The image is so dim - Adjust the CNT of monitor and iris
4. No motion detection frame and privacy shaded frame -Check the option is
ON or OFF. Or check the menu parameters
5. Screen color cast in the special environment - Adjust WEB mode or direction
6. The screen flickering – Adjust camera angle to change light input.
7. Functions are not working correctly - Restore default settings
8. The camera works abnormally; the surface over-heats; has peculiar smell,
smoke etc. – Please immediately disconnect power. Then send the camera
to professionals for maintenance
Accessory List
No.
Name
Quantity
1
CCTV Camera
1
2
User Manual
1
3
Screw
1
Remark