Download User Manual PDF

20
TROUBLESHOOTING
164
Faults
Possible cause
Action
Engine overheats
Defect in radiator fan system
–
Check the radiator fan system.
The engine diagnosis warning
lamp (MIL) lights up red
Fault in fuel injection system
–
Read out the fault memory using the KTM diagnostics tool.
Lack of fuel
–
Refuel. (
Fuse 1, 3, 4, or 8 is blown
–
Change the fuses of individual power consumers.
( p. 127)
ABS fuse is blown
–
Change the ABS fuses. (
Large difference in wheel speeds of the
front and rear wheels
–
Stop the vehicle, switch off the ignition, and
start it again.
Malfunction in ABS
–
Read out the ABS fault memory using the KTM
diagnostics tool.
Engine vent hose bent
–
Route the vent hose without bends or change it if
necessary.
Engine oil level too high
–
Check the engine oil level. (
Engine oil too thin (low viscosity)
–
Change the engine oil and oil filter, clean the oil
screen. ( p. 152)
Headlight and parking light are not
functioning
Fuse 6 blown
–
Change the fuses of individual power consumers.
( p. 127)
Turn signal, brake light, and horn are
not functional
Fuse 6 blown
–
Change the fuses of individual power consumers.
( p. 127)
Time is not (correctly) displayed
Fuse 2 blown (Option: Without ABS)
–
Change the fuses of individual power consumers.
( p. 127)
–
Set the clock. (
–
Change the fuses of individual power consumers.
( p. 127)
–
Set the clock. (
Engine dies during the trip
The ABS warning lamp lights up
(Option: With ABS)
High oil consumption
Fuse 8 blown (Option: With ABS)
p. 71)
p. 126)
p. 152)
p. 47)
p. 47)