Download USER`S MANUAL

3. Inserta PlasticShim(97)intoeachsideof theposton
therightsideoftheBase(11). Next,orienttheRight
Upright(62)asshown,andinsertit intotheBase.Make
surethatthe WireHarness(21)doesnot fall intothe
RightUpright.Becarefulto avoidpinchingtheWire
Harness.Note:If necessary,
tapthe RightUprightwitha
rubbermalletuntilit isfullyseatedintheBase.If the
RightUprightcannotbefullyseated,removetheouter
PlasticShimandtheninsertthe RightUpright.
21
62
Thishole
mustbe
onthisside.
Attachthe RightUpright(62)totheBase(11)withthree
1"Bolts(8)andthreeStarWashers(9).Donot tighten
the Boltsyet.
AssembletheLeftUpright(notshown)in thesameway.
9
8
4. HoldtheCrossbar(34)betweentheUprights(62,76).
AttachtheCrossbar
withtwo2 1/2"Bolts(53)andtwo
5/16"Washers(57).Donot tightenthe Boltsyet.
34
57
76
5. IdentifytheRightHandrail(47),whichhasa largeholein
theleftside.FeedtheWireHarness(21)up intotherectangularbracketontheRightHandrailandoutthelarge
holeintheleftside.Note:It maybehelpfulto use
needlenose
plierstopulltheWireHarnessoutofthe
largehole.
1
\
/
8
Ground
Wire
21
96
Removeanyplastictiesthatarein therectangular
bracketontheRightHandrail(47).Insertthebracketinto
thetopoftheRightUpright(62).Attachtheupperand
lowerendsofthe RightHandrailtothe RightUprightwith
two1"Bolts(8).Donot tightenthe Boltsyet.
Bracket
AttachtheLeftHandrail(1)as described
above.Note:
Thereis nota wireharnessontheleftside.
Attachtheendof thegroundwiretothesmallholeinthe
sideofthe RightHandrail(47)witha SilverGround
Screw(96).