Download LS-100 User`s Manual

Device menu [Device Menu]
Notes
• Never format the recorder from the PC.
• Upon formatting, all existing data including files
for which File Lock was set and read-only files
are lost.
• To format the setting of each function, conduct
[Reset Settings] (☞ P. 112).
• When inserting an SD card into the recorder,
always check whether the recording medium to
be operated is [Internal memory] or [SD card]
(☞ P. 108).
1 Disconnect the AC Adapter during formatting.
2 Remove the battery during formatting.
3 Remove the SD card during formatting
when [SD card], removing the SD card
during processing.
6
Device menu
• Replace the battery with a new one in order to
ensure that the battery does not go flat during
formatting. In addition, it may take over 10
seconds to complete formatting. Never perform
operations such as the following during formatting, as such operations may damage the data.
• When the SD card is formatted using the
recorder, the SD card will be the quick format.
[Format] does not completely delete the data in
the SD card. It only updates the file management
information. When transferring or discarding the
recorder, be careful that data is not leaked from
the SD card. It is recommended to destroy the
SD card before discarding the recorder.
EN
115