Download JP 883

Loading documents in the
printer
1. Pull up document support on the rear of the
multiple document feeder to support the
document format you are loading and make
sure that the left margin guide on the multiple
document feeder is at the physical left hand
margin.
5. Press PAPER on the printer operator panel.
The first document is inserted to the first print
position. Press PAPER again, to make sure
that the document feeds smoothly through
and exits from the printer without crushing or
skewing.
2. Fan the documents thoroughly.
3. Align the documents against the physical
right margin and load them into the multiple
document feeder, inserting them carefully
until them stop inside the printer.
The multiple document feeder can contain up to
120 x 80 g/m2 sheets of plain paper. For other
types and sizes of documents and envelopes,
see “Product Characteristics” in this manual
and the specific topic in the On-Line Guide
loaded when you install your printer driver.
Do NOT add paper to that already in the multiple
sheet feeder; always remove any existing paper
and fan it together with the paper to be loaded.
4. Position the left guide against the left edge of
the paper.
6
Installation Guide