Download SRL449EW User Manual

Transcript
1. Remove the Hinge Cover and detach the
sensor from the right Hinge Cover.
7. Remove the freezer door from the Bottom
hinge by carefully lifting the door straight up.
(1)
(2)
01 SETTING UP
2. Remove bolts ( 1 ) and disconnect the wire ( 2 ).
6. Disassemble the Middle hinge.
3. Remove Door Cover ( 1 ).
(1)
CAUTION
The door is heavy, be careful not to injure
yourself when removing the door.
8. Lay the refrigerator carefully.
Switch the position of Bottom Hinge and Leg.
before
4. Remove the Hinge and detach Hinge Case
from the hinge. Pull the wires out from the
Hinge Case. (Door display type only)
after
5. Remove the fridge door from the Middle hinge
by carefully lifting the door straight up.
9. Remove the screw on the bottom right side of
the fridge and freezer door.
Switch Door Stopper ( 1 ), Grommet ( 2 ) and
Bracket ( 3 ) from the right to the left.
(1)
(2)
(3)
(3)
(2)
(1)
CAUTION
The door is heavy, be careful not to injure
yourself when removing the door.
setting up _09
DA68-02676A(0.0)-EN.indd 9
2012.7.17 10:17:26 AM