Download eGo LCD Battery User Manual Website: www.novocig.com

Transcript
eGo LCD Battery User Manual
The eGo LCD battery with LCD display and 5 cliks On/OFF switch, the normal eGo LCD batter is
650mAh, MEGA eGo LCD battery is 1100mAh, shows you remaining battery life and how many "puffs"
you have taken since last charging process. Display has backlight clearly visible in the night while you
press the eGo button. "Puffs" counter counts to "999" and resets to "0" ONLY in the charging time, you
can reset it too.
Advantages:
--1. Battey power display: displays a battery charge meter, shows the battery life remaining, so no more
guessing when you need to recharge.
--2. LCD have puff number display: it counts the number of puffs that you have taken since the last
charge, the puff counter is excellent in that you can now really keep track of your nicotine intake and
monitor how much you are vaping.
--3. Display has backlight clearly visible in the night while you press the eGo button.
--4. 5-click safety cutoff: click the power button five times to turn off the battery and five times again to
turn on the battery. This is a very convenient option if you typically carry your electronic cigarette in your
pocket or purse.
How to use eGo LCD battery:
--1. On/Off:
click the power button five times to turn on the battery and five times again to turn off the
battery
--2. Work: crew and connect the atomizer(eGo, eGo type A, eGo-T, eGo-C, eGo-W, ect) with the eGo
LCD battery, then they will be stand-by state, The LCD eGo works only when you press the eGo LED
power button. Press the LED power button and inhale at the same time.
--3. Reset: reset "Puffs" counter counts to "0",
1), The " Puffs" counter will count to "0" when you charge the battery.
2), Click the power button five times to turn off the battery, then press the power botton for 5 seconds, the
LCD backlight lights, and then click the power button five times again to turn on the battery, the " Puffs"
counter will count to "0".
--4.Charge: if the LCD charge meter displys low power, it's time to charge the eGo battery, you just
screw the eGo battery with the USB charger, then plug it into the PC or AC-USB Adapter.
Website: www.novocig.com