Download GOT2000 Connection Manual (Microcomputer, MODBUS, Peripherals)

8.3 GOT Side Settings
8.3.1
Setting communication
interface
 Bar code reader setting
 Controller setting
2.
4.
3.
Click!
Set the channel of the equipment to be connected to
the GOT.
2.
3.
4.
2.
Click!
1.
2.
3.
4.
Select [Common]
menu.
3.
Select [Common]
[Peripheral Setting]
Code] from the menu.
Check the [Use Bar Code] to set the function. For
details on the function setting, refer to the following
manual.
GT Designer3 (GOT2000) Help
4.
Clicking the detail setting button displays the
Communication Detail Settings dialog box for each
communication driver.Make the settings according to
the usage environment.
Set Manufacturer, Controller Type, I/F, and Driver
according to the connected equipment to be used.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
Click the [OK] button when settings are completed.
POINT
The settings of connecting equipment can be set and
confirmed in [I/F Communication Setting]. For details,
refer to the following.
1.1.2 I/F communication setting
8
Set the interface to which the bar code reader is
connected.
[Controller Setting] from the
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
[Bar
8.3.2 Communication detail settings
Click the [OK] button when settings are completed.
POINT
(1) Communication interface setting
When Channel No.8 is used, the following external
devices, which use Channel No.8, cannot be
connected at the same time.
• RFID controller that uses the external
authentication
• RFID controller that requires the power supply
When connecting the above-mentioned devices at
the same time, set [Bar Code] to Channels No. 5
to 7.
(2) Setting for the driver
To Channels No. 5 to 8, multiple [Bar Code]
cannot be set.
8. BAR CODE READER CONNECTION
8.3 GOT Side Settings
8-3
BAR CODE READER CONNECTION
1.