1
Download caution - Brother
Transcript
KNOWING YOUR SEWING MACHINE — ——— —— ——— —— ——— —— —— ——— —— ——— —— ——— —— ——— —— ——— —— ——— —— ——— —— ——— —— ——— —— ——— —— —— ——— —— ——— —— — —— Drawing up the lower thread a Lightly hold the end of the upper thread. d threads and pull them toward the back of the Pull out about 10 cm (4 inches) of both machine under the presser foot. a Upper thread b raise the needle either by turning the While holding the end of the upper thread, handwheel toward you (counterclockwise) so that the mark on the wheel points up or by pressing (needle position button) (for models equipped with the needle position button) once or twice. or a Upper thread b Lower thread ■ For models equipped with the quick-set bobbin You can begin sewing immediately without drawing up the bobbin thread. When sewing gathers or darts, you can draw up the lower thread by hand so that some thread will be left over. Before you draw up the lower thread, put the bobbin back in. a of the arrow, and leave it there without Pass the thread along the slit in the direction cutting it. a Mark b Needle position button c thread. Pull on the upper thread to draw up the lower • The bobbin cover should still be removed. b steps Draw up the lower thread as described in a to d. c a Upper thread b Lower thread 30 Replace the bobbin cover.
