Download 4 - Atec.ro

When You Cannot Print
Cause
The hub and the printer are incompatible
or have some problem.
Remedy
Reference
Page
Press the
button on the operator panel and select
[Admin Setup], [Network Setting], then [Hub Link
Setting], then select [10Base-T Half].
–
It takes much time to print because of the Press the
button on the operator panel and select
hub settings.
[Admin Setup], [Network Setup], then [TCP ACK],
then select [Type2].
–
„„ For Windows
Cause
4
IP address is incorrect.
Remedy
Troubleshooting
Check that the same IP address is set for the printer
and the printer’s port setting on the computer.
If using OKI LPR Utility, check the IP address setting in
OKI LPR Utility.
Reference
Page
page 68
USB Connection Problems
„„ Common to Windows and Mac OS X
Cause
Unsupported USB cable is being used.
A USB hub is being used.
Printer driver is not installed correctly.
Remedy
Use a USB 2.0 cable.
Connect the printer directly to the computer.
Reinstall printer driver.
Reference
Page
–
page 67
page 68
page 74
„„ For Windows
Cause
The printer is off line.
Remedy
Right-click the printer icon in the [Devices and
Printers] folder, and then select [See what’s printing]
([printer name*] when multiple printer drivers are
installed). In the dialog box displayed, select the
[Printer] menu and then remove the check from [Use
Printer Offline].
Reference
Page
–
* Select the type of a printer driver you want.
A switch, buffer, extension cable, or USB
hub is being used.
A driver for a different printer that uses a
USB connection has been installed.
Connect the printer directly to the computer.
Delete the other printer driver from the computer.
- 110 -
page 57
–