Download Global

41
M.I.B. III (MB Intelligent BIOS III)
This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have installed in your system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
M.I.B.III (MB Intelligent BIOS III)
f Memory Configuration
Press Enter
Auto
Auto
200
Enabled
Enabled
Disabled
Disabled
Disabled
1.20v
1.50v
CPU Frequency Ctrl:
HT Frequency
CPU/HT Reference Clock (MHz)
Auto Detect DIMM/PCI CIK
Spread Spectrum
Adjust CPU Voltage
Adjust DIMM Voltage
Adjust NB Voltage
Adjust HT Voltage
Adjust SIDEPORT Voltage
AMD Phenom (tm) II X3 750e Processor
Speed : 2500MHz, NB Clk: 2000MHz
Current CPU Frequency
2500MHz
Current CPU Voltage
1.1750v
Current NB Frequency
2000MHz
CPU Vcore
: 1.200 V
VDIMM
: 1.596 V
mnlk: Move
Enter : Select
F1:General Help
Help Item
Adjust SIDEPORT Voltage
1.50V
1.60V
1.70V
1.75V
WARNING:
Doing overvoltage may result in damage in system.
+/-/: Value
F10: Save
F9: Optimized Defaults
ESC: Exit
f Memory Configuration
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Memory Configuration
Help Item
Memory Configuration
Memory Clock Mode
DRAM Timing Mode
Bank Interleaving
Channel Interleaving
Auto
Auto
Auto
XOR of Address bits
Memory CLK
CAS Latency (Tcl)
RAS/CAS Delay (Trcd)
Row Precharge Time (Trp)
Min Active RAS (Tras)
RAS/RAS Delay (Trrd)
Row Cycle (Trc)
mnlk: Move
Options
Auto
Limit
Manual
: N/A, 667 MHz
: N/A, 9 Clk
: N/A, 9 Clk
: N/A, 9 Clk
: N/A, 24 Clk
: N/A, 4 Clk
: N/A, .33 Clk
Enter : Select
F1: General help
+/-/: Value F10: Save ECS: Exit
F9: Optimized Defaults
Memory Clock Mode (Auto)
This item is used to set the memory clock mode.
DRAM Timing Mode (Auto)
This item enables you to specify the DRAM timing mode to be configured automatically or manually.
Using BIOS