Download pSOSystem System Calls
Transcript
psc.book Page 28 Monday, January 11, 1999 1:50 PM Error Codes TABLE A-4 Hex pSOSystem System Calls pHILE+ Error Codes (Continued) Mnemonic and Description System Call(s) 0x2030 E_ECMD: Illegal command. The cmd is illegal or not supported by the volume’s file system type. control_vol 0x2031 E_EARG: Illegal argument. The arg is not appropriate for the selected command. control_vol cmd 0x2041 E_BUFSIZE: Buffers not available for block size. The pHILE+ format volume has a block size greater than the cache buffer size. Increase fc_logbsize. However, this also increases the block size of any pHILE+ format volume initialized by init_vol(). mount_vol 0x2042 E_MEDIA: Change occurred for removable me- All system calls. CONTROL_VOL_CHANGED_VOL dia. Attempted to reference a volume that was changed. This happens if a file descriptor refers to a volume that was changed. The file descriptor should be closed. It also happens if a volume is changed in the middle of a system call that uses the volume. 0x2050 E_BADNFS: NFS volume; illegal operation. This function cannot be used with NFS volumes. annex_f, get_fn, lock_f, open_fn, read_vol, sync_vol, write_vol 0x2051 E_MAXLOOP: Symbolic links nested too deeply. A pathname contains symbolic links nested more than three levels deep. access_f, change_dir, chmod_f, chown_f, create_f, link_f, lstat_f, make_dir, move_f, nfsmount_vol, open_dir, open_f, read_link, remove_f, stat_f, stat_vfs, symlink_f, truncate_f, unmount_vol, utime_f, verify_vol A-28
Related documents
pSOSystem System Calls
User Manual - HumDesi Radio
pSOSystem Programmer`s Reference
V750-series UHF RFID System User`s Manual
GAMS — A User's Guide
Motorola A008 Service manual
pSOS System Concepts
pSOS Reference
PHILIPS
Motorola ME4251 User's Manual
pRISM+ User`s Guide
V750 Series UHF RFID System Reader/Writer/Antenna User`s Manual